D&R AXUM Manuel d'utilisateur télécharger pdf (Page 59)

How to program the Airlab

Airlab from D&R Phone +31 294 418014, email: [email protected] Page 59

14.2 MASTER SETTINGS

To enter this part of the programming hit the EXIT button and you will see that the LCD returns to its

TIMER menu.

Now hit the UP or DOWN switch again until you see the text MASTER SETTINGS. This brings you into the

master settings menu. Now push the ENTER switch to enter the four master programming possibilities.

AUTO CUE RESET

Use the YES and NO button to switch 'Auto cue Reset'

option on and off.

HOW TO PROGRAM

With the YES and NO switches you can activate or de-

activate this option. Don't forget to confirm changes you

made in software with the enter switch.

CUE TO CRM

CUE to CRM is an option, which enables you to route the

CUE signal to the CRM speakers.

HOW TO PROGRAM

With the YES and NO switches you can activate or de-

activate this option. Don't forget to confirm changes you

made in software with the enter switch.

AUTO COMMUNICATION

When this feature is activated you can create a

communication link from a remotely connected SiCo box to

an announcer module.

To make this work the 'Mic Rem. CUE' option needs to be

activated.

HOW TO PROGRAM

With the YES and NO switches you can activate or de-activate this option. Don't forget to confirm changes

you made in software with the enter switch.

RS232

The RS232 option enables you to connect the Airlab to a

PC. Basically The Airlab software is a graphical user

interface version of the software structure inside the Airlab.

HOW TO PROGRAM

With the YES and NO switches you can activate or de-

activate this option. Don't forget to confirm changes you made in software with the enter switch.

IMPORTANT INFORMATION

To save all the work you have done you simply hit the ENTER switch and all settings are stored

in the internal memory of the Airlab.

Pressing the ESC switch instead will discard all the changed settings in the last session.

Auto CUE Reset?

YES

CUE to CRM?

YES

Auto Comm?

YES

Enable RS 232?

YES

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 114 115

Commentaires sur ces manuels

Pas de commentaire

D&R AXUM Manuel d'utilisateur Page 59

Commentaires sur ces manuels

Produits connexes et manuels pour Mélangeurs audio D&R AXUM