D&R AXUM Manuel d'utilisateur télécharger pdf (Page 52)

How to program the Airlab

Airlab from D&R Phone +31 294 418014, email: [email protected] Page 52

REMOTE CUE POSSIBLE IN LINE A MODE

To enter the next programming possibility you simply hit the

DOWN button again and you will see a new item. See on the

right what the LCD shows:

This option allows you to set if the CUE must be activated by

an incoming remote on one or more modules, when set in

Line A input mode.

HOW TO PROGRAM

The SELECT switches in the modules have a dual function. They select the module you are programming

and at the same time you can toggle between the active and not active setting. This is a very quick way of

programming this function. If you have already programmed several modules, the moment you enter this

menu again the LED’s located near the SELECT switch will light up on the modules that are capable of

activating the CUE by a remote switch.

REMOTE CUE POSSIBLE IN LINE B MODE

To enter the next programming possibility you simply hit the

DOWN button again and you will see a new item. See on the

right what the LCD shows:

This option allows you to set if the CUE must be activated by

an incoming remote on one or more modules, when set in

Line B input mode.

HOW TO PROGRAM

The SELECT switches in the modules have a dual function. They select the module you are programming

and at the same time you can toggle between the active and not active setting. This is a very quick way of

programming this function. If you have already programmed several modules, the moment you enter this

menu again the LED’s located near the SELECT switch will light up on the modules that are programmed

to activate the CUE by a remote switch in line B input mode.

REMOTE CUE POSSIBLE IN MIC MODE

To enter the next programming possibility you simply hit the

DOWN button again and you will see a new item. See on the

right what the LCD shows:

This option allows you to set if the CUE must be activated by

an incoming remote on one or more modules, when set in

Mic input mode. This option is necessary for COUGH/COMM.

Not available for Telco Module.

HOW TO PROGRAM

The SELECT switches in the modules have a dual function. They select the module you are programming

and at the same time you can toggle between the active and not active setting. If you had already

programmed several modules, the moment you enter this menu again the LED’s located near the SELECT

switch will go on, on those modules that are capable of activating the CUE by a remote switch when the

MIC input is selected.

LineA Rem. Cue?

Toggle by SELECT

LineB Rem. Cue?

Toggle by SELECT

Mic. Rem. Cue?

Toggle by SELECT

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 114 115

Commentaires sur ces manuels

Pas de commentaire

D&R AXUM Manuel d'utilisateur Page 52

Commentaires sur ces manuels

Produits connexes et manuels pour Mélangeurs audio D&R AXUM