D&R AXUM Manuel d'utilisateur télécharger pdf (Page 7)

System Description

Broadcasting Options

In designing the Airlab, D&R decided to make the system as flexible for the operator as possible. Therefore

the Airlab can be used in many ways.

There's a minimum of jumper settings, which can be set to suit your own needs. Most of the settings are

under software control in the master section and can be stored to a chip card.

The Airlab can be used in a traditional manner with separate control and announcer rooms, or in a more

open way, whereby announcing and engineering control are carried out in one room. A self-op setup or a

combination of several setups is possible.

More than one Broadcast Studio

There are numerous monitor facilities in the Airlab for external sources as well as internal sources. The

control monitors (and meters) can be switched to follow the control room for separate (stereo) sources.

These features mean that the Airlab is specially suited to work in a studio-complex environment, where

there is more than one studio/control room being used for broadcast.

In this situation, the Airlab is capable of being the main On-Air console due to the two main outputs it

contains. These main outputs can be fully transformer balanced as an option.

Special Recording Outputs

The Airlab has a special Tape/Recording output on a 0dBu output level.

Double Stereo VU/Peak Metering

In order to achieve a good balance between spoken words and music, it's important to be able to read the

recording level accurately. The Airlab has a standard 4 VU meters reading per pair the main output and the

CUE output. A PPM version of the VU meter is available as an option.

SUMMARY

Whilst using the Airlab, you'll discover its many hidden features, and will continue to appreciate its

extensive capabilities.

1 2 3 4 5 6 7 8 9 10 11 12 ... 114 115

Pas de commentaire

D&R AXUM Manuel d'utilisateur Page 7