D&R AXUM Manuel d'utilisateur télécharger pdf (Page 57)

How to program the Airlab

Airlab from D&R Phone +31 294 418014, email: [email protected] Page 57

REMOTE ON POSSIBLE IN MIC MODE

To enter the next programming possibility you simply hit the

DOWN button again and you will see a new item. See on

the right what the LCD shows:

This allows you to operate the ON switch on one or more

selected modules by corresponding remote, when the Mic

input is selected. Not available for Telco Module.

HOW TO PROGRAM

The SELECT switches in the modules have a dual function. They select the module you are programming

and at the same time you can toggle between the active and not active setting. If you have already

programmed several modules, the moment you enter this menu again the LED’s located near the SELECT

switch will light up on the modules that are capable of activating the ON by a remote switch when the MIC

input is selected.

REMOTE ON POSSIBLE IN LINE A MODE

To enter the next programming possibility you simply hit the

DOWN button again and you will see a new item. See on

the right what the LCD shows:

This allows you to operate the ON switch on one or more

selected modules by the corresponding remote, when the

Line A input is selected. Always off for Telco module.

HOW TO PROGRAM

The SELECT switches in the modules have a dual function. They select the module you are programming

and at the same time you can toggle between the active and not active setting. This is a very quick way of

programming this function. If you have already programmed several modules, the moment you enter this

menu again the LED’s located near the SELECT switch will light up on the modules that are capable of

activating the ON by a remote switch.

REMOTE ON POSSIBLE IN LINE B MODE

To enter the next programming possibility you simply hit the

DOWN button again and you will see a new item. See on

the right what the LCD shows:

This allows you to operate the ON switch on one or more

selected modules by the corresponding remote, when the

Line B input is selected. Always off for Telco module.

HOW TO PROGRAM

The SELECT switches in the modules have a dual function. They select the module you are programming

and at the same time you can toggle between the active and not active setting. This is a very quick way of

programming this function. If you have already programmed several modules, the moment you enter this

menu again the LED’s located near the SELECT switch will light up on the modules that are capable of

activating the ON by a remote switch in line B input mode.

SWITCH START

To enter the next programming possibility you simply hit the

DOWN button again and you will see a new item. See on

the right what the LCD shows:

With this option active the module is always ON and

operation On-switch will only trigger the start-remote. Not

available for Telco Module.

HOW TO PROGRAM

The SELECT switches in the modules have a dual function. They select the module you are programming

and at the same time you can toggle between the active and not active setting. This is a very quick way of

programming this function. If you have already programmed several modules, the moment you enter this

menu again the LED’s located near the SELECT switch will light up on the modules that are capable of

Switch Start.

MIC Rem. On?

Toggle by SELECT

LineA Rem. On?

Toggle by SELECT

LineB Rem. On?

Toggle by SELECT

Switch Start?

Toggle by SELECT

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 114 115

Commentaires sur ces manuels

Pas de commentaire

D&R AXUM Manuel d'utilisateur Page 57

Commentaires sur ces manuels

Produits connexes et manuels pour Mélangeurs audio D&R AXUM